การแก้ไข: ไม่มีโปรโตคอลเครือข่ายอย่างน้อยหนึ่งรายการ

ไม่มีโปรโตคอลเครือข่ายอย่างน้อยหนึ่งโปรโตคอลบนคอมพิวเตอร์นี้เป็นข้อผิดพลาดที่เกิดขึ้นเนื่องจากรายการรีจิสทรีของ Windows Sockets ที่จำเป็นสำหรับการเชื่อมต่อเครือข่าย เมื่อรายการเหล่านี้หายไป” จะทำให้เกิดข้อผิดพลาดนี้ที่รายงานโดย Windows Network Diagnostics จะปรากฏขึ้นเมื่อระบบของคุณไม่สามารถเชื่อมต่อกับอินเทอร์เน็ตและคุณคลิกปุ่มวินิจฉัย คุณอาจสามารถ ping ที่อยู่ปลายทางของคุณได้ แต่เบราว์เซอร์ของคุณจะไม่สามารถทำเช่นนั้นได้ ในกรณีส่วนใหญ่ความไม่สอดคล้องกันใน Windows Sockets API หรือที่เรียกว่า Winsock เป็นสาเหตุของปัญหานี้

รับผิดชอบการร้องขอเครือข่ายของโปรแกรมทั้งขาเข้าและขาออก ปัญหานี้อาจเกิดจากผู้ให้บริการอินเทอร์เน็ตของคุณ แต่หากอินเทอร์เน็ตทำงานบนอุปกรณ์อื่น ๆ ของคุณที่เชื่อมต่อกับ ISP เดียวกันแสดงว่า ISP นั้นโอเคและเราสามารถดำเนินการตามขั้นตอนการแก้ไขปัญหาต่อไปได้

ไม่มีโปรโตคอลเครือข่ายอย่างน้อยหนึ่งรายการ

วิธีการแก้ไขเครือข่ายอย่างน้อยหนึ่งโปรโตคอลที่ขาดหายไป

คู่มือนี้ใช้ได้กับ Windows ทุกเวอร์ชัน

วิธีที่ 1: กู้คืนไฟล์โปรโตคอลที่หายไป

ดาวน์โหลดและเรียกใช้ Restoro เพื่อสแกนหาไฟล์ที่เสียหายโดยคลิกที่นี่หากพบว่าไฟล์เสียหายให้ทำการซ่อมแซม

วิธีที่ 2: ปิดการใช้งาน IPv6

ดูขั้นตอนที่นี่เพื่อปิดใช้งาน IPv6

วิธีที่ 3: รีเซ็ต Winsock

เป็นที่ทราบกันดีว่าการทุจริตของ Winsock ทำให้เกิดข้อผิดพลาดดังกล่าว ในกรณีส่วนใหญ่ปัญหาจะได้รับการแก้ไขโดยการรีเซ็ต winsock ในการรีเซ็ต winsock ให้ทำตามขั้นตอนด้านล่าง

  1. กดปุ่ม Windows ในกล่องค้นหาให้พิมพ์cmd จากรายการผลลัพธ์ที่ปรากฏ; คลิกขวาบนcmdและคลิกเรียกใช้ในฐานะผู้ดูแลระบบ หากคุณใช้ Windows 8 หรือ 10 ให้กดปุ่ม Windows ค้างไว้แล้วกด X เลือกCommand Prompt (Admin)แล้วคลิกที่มันอย่างน้อยหนึ่งโปรโตคอลเครือข่ายหายไป -1
  2. ในหน้าต่างพร้อมรับคำสั่งสีดำพิมพ์Winsock netsh รีเซ็ตและกดEnter

อย่างน้อยหนึ่งโปรโตคอลเครือข่ายหายไป -2

รีสตาร์ทระบบของคุณและการตรวจสอบปัญหาได้รับการแก้ไข

วิธีที่ 4: รีสตาร์ทอะแดปเตอร์เครือข่ายของคุณ

ความผิดพลาดชั่วคราวในอะแดปเตอร์เครือข่ายสามารถป้องกันไม่ให้รับโปรโตคอล การรีสตาร์ทอย่างง่ายอาจช่วยแก้ปัญหาได้ เพื่อทำสิ่งนี้; ถือปุ่ม Windowsและกด R ในกล่องโต้ตอบเรียกใช้พิมพ์ncpa.cplและคลิกตกลง

โปรโตคอลเครือข่าย - 1

คุณจะเห็นรายการอะแดปเตอร์เครือข่ายหากคุณไม่รู้ว่าอันไหนเป็นของคุณคุณสามารถทำซ้ำขั้นตอนด้านล่างกับอะแดปเตอร์ทั้งหมดที่อยู่ในรายการมิฉะนั้นให้ดำเนินการกับอะแดปเตอร์ที่คุณใช้เชื่อมต่อ

คลิกขวาที่อะแดปเตอร์เครือข่ายของคุณและเลือกปิดการใช้งาน แล้วคลิกขวาที่มันอีกครั้งและเลือกเปิดใช้งาน

โปรโตคอลเครือข่าย - 2

วิธีที่ 5: รีเซ็ตส่วนประกอบ

ในโซลูชันนี้เราจะรีเซ็ตและรีเฟรชส่วนประกอบที่เกี่ยวข้องกับการเชื่อมต่อเครือข่าย

สร้างไฟล์ข้อความและบันทึกเป็นfixnetwork.batด้วยรหัสต่อไปนี้

ipconfig / flushdns ipconfig / registerdns ipconfig / release ipconfig / ต่ออายุ netsh winsock reset catalog netsh int ipv4 reset reset.log netsh int ipv6 reset reset.log หยุดปิดชั่วคราว / r

คลิกขวาที่ไฟล์ที่ดาวน์โหลดหรือไฟล์ค้างคาวที่คุณสร้างขึ้น (โดยใช้คำสั่งดังกล่าวข้างต้น) และคลิกเรียกใช้ในฐานะผู้ดูแลระบบ ระวังข้อความที่ถูกปฏิเสธการเข้าถึงหากคุณสังเกตเห็นให้ทำตามขั้นตอนด้านล่างอื่น ๆ กดปุ่มใด ๆ เมื่อมีข้อความบนหน้าต่างสีดำเพื่อรีบูต หลังจากรีบูตแล้วให้ทดสอบ

2016-01-13_215902

เป็นการนำเข้าเพื่อสร้างการสำรองข้อมูลรีจิสทรีก่อนดำเนินการตามขั้นตอนรีจิสทรี คุณสามารถทำได้โดยคลิกไฟล์ -> ส่งออก (ด้วยคอมพิวเตอร์) ที่เลือกจากบานหน้าต่างด้านซ้ายบนและส่งออก (บันทึกไว้ที่ใดที่หนึ่งในคอมพิวเตอร์ของคุณ) สิ่งนี้ควรทำสำหรับทุกวิธีที่คุณทำตามที่เกี่ยวข้องกับการเปลี่ยนรีจิสทรี

ในการแก้ไขสิทธิ์ให้แก้ไขคีย์รีจิสทรีต่อไปนี้:

ต้องการทำเช่นนั้นถือของ Windowsที่สำคัญและกดR ประเภท: regeditในการทำงานโต้ตอบและกดEnter หน้าต่างตัวแก้ไขรีจิสทรีจะเปิดขึ้น

ถือCTRLสำคัญและกด F ในกล่อง Find What พิมพ์ค่าต่อไปนี้แล้วคลิกFind Next

รอให้ค้นหาคีย์เมื่อค้นหาแล้วให้ขยายคีย์นี้เพื่อค้นหาโฟลเดอร์ชื่อ26

eb004a00-9b1a-11d4-9123-0050047759bc

2016-01-13_220351

เส้นทางสู่คีย์แบบเต็มคือ

H KEY_LOCAL_MACHINE / SYSTEM / CurrentControlSet / Control / Nsi / {eb004a00-9b1a-11d4-9123-0050047759bc} / 26 .

คลิกขวาที่26และคลิกสิทธิ์

2016-01-13_220358

คลิกปุ่มเพิ่ม ประเภททุกคนในข้อความกล่องและกดตกลง หากทุกคนมีอยู่แล้วให้อนุญาตการเข้าถึงแบบเต็ม คลิกตกลง ตอนนี้เรียกใช้ไฟล์ที่ดาวน์โหลดมาในฐานะผู้ดูแลระบบ

2016-01-13_220407

วิธีที่ 6: ติดตั้ง TCP / IP ใหม่

TCP / IP คือชุดของโปรโตคอลที่กำหนดวิธีที่คุณเชื่อมต่อกับอินเทอร์เน็ต ความคลาดเคลื่อนที่เกิดขึ้นสามารถบล็อกการเข้าถึงอินเทอร์เน็ตของคุณได้ทันที ถือปุ่ม Windowsและกด R พิมพ์ncpa.cplแล้วคลิกตกลง

โปรโตคอลเครือข่าย - 1

คุณจะมีการเชื่อมต่อแบบใช้สายหรือแบบไร้สายไม่ว่าจะเป็นการเชื่อมต่อที่ใช้งานอยู่คลิกขวาแล้วเลือกคุณสมบัติ

ขาดโปรโตคอล 1

ภายใต้ส่วนประกอบนี้ใช้รายการต่อไปนี้ให้คลิกปุ่มติดตั้ง คลิกโปรโตคอลจากนั้นคลิกปุ่มเพิ่ม

ไม่มีโปรโตคอล 2

คลิกมีดิสก์ปุ่ม ภายใต้คัดลอกไฟล์ของผู้ผลิตจากกล่องพิมพ์C: \ windows \ infแล้วคลิกตกลง

ขาดโปรโตคอล 3

Under the Network Protocol list, click Internet Protocol (TCP/IP) and then click OK.

ไม่มีโปรโตคอล 4

If you get the This program is blocked by group policy error, then there is one other registry entry to add to allow this install. Hold Windows key and press R.

ขาดโปรโตคอล 5

Type regedit and press Enter.

In the Registry Windows, navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\safer\codeidentifiers\0\Paths

Right click on paths in the left pane and click Delete. Now repeat the above process to reinstall TCP/IP.

Close all windows, and restart your system. Your problem should be gone now. If not, move on to the next solution. This method does not apply to home based versions of windows.

Method 7: Uninstall and Reinstall Your Security/Antivirus Software

If you have recently installed any Internet Security Software, it may be blocking your access to the internet. Temporarily disable it to check if that’s what causing the problem. Quicket way is to just uninstall it, reboot the PC and then test – if system works without it, then re-install another AntiVirus. Hold the Windows key and press R. In the run dialog type appwiz.cpl and click OK. In the programs list, find your security software and right click on it. Click Uninstall. Follow the onscreen instructions to remove it and restart your system.

Method 8: Powerline Adapters

If you are using a Powerline Adapter, then it can interfere with your network. A reset can solve most of these problems. Refer to the instructions manual for the adapter to reset your Powerline Adapter.

Method 9: Disable Proxy

Go to Settings -> Network -> Proxy -> Manual Proxy Settings and turn it off.

Method 10: Change your internet router’s Wireless Mode to 802.11g

Many people have had luck with fixing this issue by changing their wireless router’s Wireless Mode to 802.11g instead of 802.11b+g+n. By default, almost all wireless routers are set to the 802.11b+g+nWireless Mode out of the box. In order to change your internet router’s Wireless Mode to 802.11g, you need to:

Login to your wireless router’s administration and settings panel through a browser of your choice. Instructions for accessing your wireless router’s administration and settings panel will be found on the user manual that came with your wireless router.

Scour everything under the Wireless category for a setting by the name of Wireless Mode or Mode.

Set your wireless router’s Mode/Wireless Mode to 11g or 11g – whichever applies in your case.

Save the changes and exit your wireless router’s administration and settings panel.

Restart both your wireless router and your computer.

Check to see whether or not the issue has been fixed once your computer boots up.

Method 11: Hard reset your wireless router

If none of the methods listed and described above have worked for you, there is still one more thing that you can try, and that is to hard reset your wireless router. Hard resetting your internet router will cause all of its settings and preferences to revert to their default values, and that, in many cases, has been able to fix this issue and restore internet access. In order to hard reset your wireless router, you need to:

Get your hands on a paperclip or a pin or any other pointy object.

Locate the recessed Reset button on your router. This button is basically a tiny hole normally located at the back of a router with the term Reset written above or below it.

Put the pointy end of the pointy object you acquired into the Reset button and push it all the way in. Press and hold the button for a good few seconds. This will successfully reset your router.

Once the router has been reset, restart it and then start reconfiguring it.

Method 12: Install Protocol

It is possible that the right protocol hasn’t been installed for internet settings. Therefore, in this step, we will be installing the correct protocol for the computer. For that:

  1. Rightclick on the “Wifi” icon in the system tray and selectNetwork and Internet Settings“.
  2. Click on the “Wifioption in the left pane if you are using wifi and “Ethernetoption if you are using an ethernetconnection.
  3. Click on the “Change Adapteroptions” option.
  4. Right-click on the connection you are using and selectProperties“.
  5. Click on the “Client for Microsoft Networks” option and selectInstall“.
  6. Select the “Reliable Multicast Protocol” option and select install.
  7. ปิดหน้าต่างและตรวจสอบว่าปัญหายังคงมีอยู่หรือไม่

วิธีที่ 13: ใช้การตั้งค่าอัตโนมัติ

เป็นไปได้ว่าพีซีของคุณได้รับการกำหนดค่าให้ใช้ที่อยู่ DNS เฉพาะ แต่ไม่ได้ให้การกำหนดค่าเครือข่ายที่ถูกต้องกับอะแดปเตอร์เครือข่ายของคุณ ดังนั้นในขั้นตอนนี้เราจะใช้การตั้งค่าอัตโนมัติเพื่อแก้ไขปัญหานี้ สำหรับการที่:

  1. กดปุ่ม“ Windows”และ“ R”แล้วพิมพ์“ ncpa.cpl”
  2. คลิกขวาที่การเชื่อมต่ออินเทอร์เน็ตของคุณแล้วเลือก“ Properties”
  3. ดับเบิลคลิกที่ตัวเลือก“ IPV4”และเลือก“ ขอรับที่อยู่เซิร์ฟเวอร์ DNS โดยอัตโนมัติ
  4. คลิกที่“ ตกลง”และตรวจสอบว่าปัญหายังคงมีอยู่หรือไม่